About   |   Donate   |   Store   |   Contact Us   |   Sign In   |   Join AAW
Woodturning News: General News

WOODWORKING NETWORK: Giant turned wood bowl 13 feet wide (10/14/2016)

Friday, October 14, 2016   (0 Comments)
Share |
WOODWORKING NETWORK: Giant turned wood bowl 13 feet wide (10/14/2016)

Some woodturning enthusiasts in Austria took the philosophy of "go big or go home" to extremes. They decided to turn a giant bowl measuring more than 13 feet in diameter and more than 3 feet deep.

Of course, the first challenge faced by Peter Andres and Werner Rumplmayr of Gurtis, Austria, was finding a woodturning lathe to spin such a massive piece. Their solution was to use a tractor mounted on a stacked wood crib platform. Then they removed a tire and wheel to mount their turning blank directly to the tractor drive hub.

Another challenge was creating the turning blank itself. Using a technique known as segmented turning. They created a blank by gluing together 486 segments of spruce in a bricklaid pattern using special glue. The gluing process alone took 430 hours. Then they had to mount a metal ring on the back of the turning blank so it could be mounted to the tractor hub. The mounting itself required a special framework and a forklift to move the giant blank.

When it came to the actual turning, they did everything with handheld gouges on heavy-duty metal tool rests. By the time they were done (20 hours later across three days) they had created more than 650 pounds of wood shavings.

View source and photos.

Association Management Software Powered by YourMembership.com®  ::  Legal